Mitsubishi Electric Air Conditioning Mr Slim PKA-M100KA PUZ-ZM100VKAR1 10Kw/36000Btu R32 Install Kit
This product is an air conditioning system and must be installed by an F-Gas registered engineer. We will require your engineer’s F-Gas certificate details before dispatch. Find out more about F-Gas regulations →
Overview
The Mitsubishi Electric Mr Slim Wall Mounted R32 Inverter Heat Pump’s are designed for long pipe runs and reusing of old R22 pipe services. Ideal for direct replacement of old air conditioning equipment with the same pipe sizes. If the size of the existing pipe-work is a larger diameter the system will still operate.
System Control Units:
PAC-SA89TA: Remote on/off adaptor (3 wire adaptor)
PAC-SA88HA: Run/fault adaptor (5 wire adaptor)
PAC-SE41TS: Remote sensor
PAR-CT01MAA-SB/PB: Touch screen wired remote controller (PB=Premium Finish)
PAR-40MAA: Standard wired remote controller
MAC-334IF: Interface for M-NET, MA remote controller (PAR-40MAA / PAR-CT01MAA), on/off input and run/fault output
MAC-397IF: Interface for MA remote controller (PAR-40MAA / PAR-CT01MAA), on/off input and run or fault output
MAC-567IF: Interface for connection to Wi-Fi MELCloud service
MELCOBEMS MINI Modbus and BACnet MSTP CN105 adaptor
MELCORETAIL MINI Retail control and input / output interface
Technical Specifications
| Indoor type | Wall Mounted |
|---|---|
| Heating capacity: nominal (kW) | 11.2 |
| Cooling capacity: nominal (kW) | 9.5 |
| Sound pressure level (dBA) | 41-45-49 |
| Fuse rating (BS88) – HRC (A) | 6 |
| Dimensions – WxDxH (mm) | 1170 x 295 x 365 |
| Weight (kg) | 21 |
| Refrigerant | R32 |
|---|---|
| Sound pressure level (dBA) | 49 |
| Pipe size – Gas (mm (in)) | 15.88 (5/8″) |
| Pipe size – Liquid (mm(in)) | 9.52 (3/8″) |
| Max pipe length (m) | 100 |
| Max pipe height (m) | 30 |
| Electrical supply | 220-240v, 50Hz |
| Starting current (A) | 13.0 |
| Running current: H/C [MAX] (A) | [27.0] |
| Fuse rating (BS88) – HRC (A) | 32 |
| Dimensions – WxDxH (mm) | 1050 x 330+40 x 1338 |
| Weight (kg) | 116 |
What’s Included
1 x Mitsubishi Electric Air Conditioning Mr Slim Wall Mounted PKA-M100KA 10Kw/36000Btu R32
1 x Mitsubishi Electric Air Conditioning Mr Slim PUZ-ZM100VHAR1 Power Inverter 10Kw/36000Btu R32 A+ 240V~50Hz
1 x Ir Controller
15 Meters x 3/8 inch coil pipe.
15 Meters x 5/8 inch coil pipe.
8 x Isoline (3/8 x 3/8) insulation 2 meter lengths Black
8 x Isoline (5/8 x 3/8) insulation 2 meter lengths Black
Wall Bracket BJ TYPE 2 BRACKETS 90KG LOAD
15m Cable Outdoor rated inter-connecting 4 core 1.5mm
1 x bag of 300mm cable ties
Installation & F-Gas
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
Key Features
High SCoP
Advanced technology control
Infra-red controller with wall mounting bracket
Slim construction
Pipe runs up to 50 metres
Low noise
Back-up switch for loss of controller
Cold draft prevention on heat pump start up
Fault diagnosis
Auto re-start after power interruption
PRE-CHARGED WITH REFRIGERANT
Old pipework can be reused
R32 Refrigerant
Mitsubishi Electric Air Conditioning Mr Slim PKA-M100KA PUZ-ZM100VKAR1 10Kw/36000Btu R32 Install Kit
£5,382.08