Daikin Air Conditioning FAA100A+AZAS100MV1 Wall Mounted Active Inverter Heat Pump 10Kw/36000Btu R32
This product is an air conditioning system and must be installed by an F-Gas registered engineer. We will require your engineer’s F-Gas certificate details before dispatch. Find out more about F-Gas regulations →
Overview
Daikin air conditioning FAA R32 range of wall mounted units have a modern look and reduced size and weight, making them a discreet option for many applications. Pairing them with Seasonal classic condensers provides a system that is optimised for Efficiency. Daikin air conditioning FAA wall mounted unit's are ideal for IT and server room applications thanks to the EDP setting which allows constant cooling at low humidity levels, providing ideal conditions for computer equipment. The flat, stylish front panel blends easily within any interior décor and is easier to clean.
Can easily be installed in both new and refurbishment projects The air is comfortably spread up- and downwards thanks to 5 different discharge angles that can be programmed via the remote control. Maintenance operations can be performed easily from the front of the unit and is flexible to install as the largest casing only weighs 17kg and piping connection can be done at the bottom, left or right of the unit. Optimum comfort guaranteed with automatic air-flow volume control as this minimises the difference between room and required temperature. No action required from occupants to meet the desired temperature. Unified indoor unit for use with R-32 refrigerant. No optional adapter needed for DIII-connection, link your unit into the wider building management system
Technical Specifications
| Technical Specifications | FAA100A | ||||
| Power input – 50Hz | Cooling | Nom. | kW | 0.061 | |
| Heating | Nom. | kW | 0.061 | ||
| Casing | Colour | Fresh White | |||
| Material | Resin | ||||
| Dimensions | Unit | Height/Width/ Depth | mm | 340/1,200/240 | |
| Packed unit | Height/Width/ Depth | mm | 429/1,310/325 | ||
| Weight | Unit | kg | 17.0 | ||
| Packed unit | kg | 24 | |||
| Heat exchanger | Fin | Type | Cross fin coil (Multi slit fins and Hi-XB tubes) | ||
| Fan | Type | Cross flow fan | |||
| Quantity | 1 | ||||
| Air flow rate | Cooling | High | m³/min | 26.0 | |
| cfm | 918 | ||||
| Mediu m | m³/min | 23 | |||
| cfm | 812 | ||||
| Low | m³/min | 19.0 | |||
| cfm | 671 | ||||
| Heating | High | m³/min | 26.0 | ||
| cfm | 918 | ||||
| Mediu m | m³/min | 23.0 | |||
| cfm | 812 | ||||
| Low | m³/min | 19.0 | |||
| cfm | 671 | ||||
| Fan motor | Speed | Steps | 3 | ||
| Output | High | W | 64 | ||
| Phase x Voltage | V | DC325 | |||
| Full load amps (FLA) | Cooling | A | 0.4 | ||
| Heating | A | 0.4 | |||
| Sound power level | Cooling | dBA | 65 | ||
| Heating | dBA | 65 | |||
| Sound pressure level | Cooling | High/Medium/ Low | dBA | 49/45/41 | |
| Heating | High/Medium/ Low | dBA | 49/45/41 | ||
| Refrigerant | Type | R-410A / R-32 | |||
| Piping connections | Liquid | Type/OD | mm | Flare connection/9,52 | |
| Gas | Type/OD | mm | Flare connection/15.9 | ||
| Drain | VP13 (I.D. 13/O.D. 18) | ||||
| Heat insulation | Foamed polystyrene/polyethylene | ||||
| 2-2 Electrical Specifications | FAA100A | ||||
| Power supply | Phase | 1~ | |||
| Frequency | Hz | 50 | |||
| Voltage | V | 220-240 | |||
Installation & F-Gas
These air conditioning units must be installed by an F-Gas qualified engineer. We can install the unit for you using our F-Gas Certified Engineers. Please note if you do not select our installation service we will not ship the unit until we have obtained evidence from you that you will have the unit installed by an F-Gas qualified engineer. This is a requirement of the Article 11 (5) EC/517/2014 on fluorinated greenhouse gases and The Fluorinated Greenhouse Gases Regulations 2015.
Daikin Air Conditioning FAA100A+AZAS100MV1 Wall Mounted Active Inverter Heat Pump 10Kw/36000Btu R32
£3,378.02




